![]() You also find two clasps holding the window regulator mechanism. The woods would serve as props to support the window from the door. The first thing you should do is to get some pieces of wood. Pull the panel up and move it off the track then twist the door and push it out of the board while it’s still holding up. You can use your hand or a sleek prying device to take out the both on each flank. Pull up the panel bottom to unhook the clamps that fasten it to the door frame. Then, take out the black plastic panel at the other end of the window locks. It would be much simpler to pull it out with a screwdriver placed on the top and dragged downwards. The next thing is to drag the tab behind the plastic connector with a screwdriver and take the connector apart. Beneath the console, disentangle the two cable connectors. Fix a flat screwdriver behind it and pull the whole console backward to detach completely. Then take the door console out of the panel. You should take the plastic covers that conceal the screws and loosen them out. The none metal screws are at the edge of the panel. Each of the metal screws is under a plastic cover, beneath the door console grip, and behind the door and the right courtesy light. The front driver’s side door panel has three metallic and two plastic screws making up the five screws that hold it in position. ![]() ![]() Here are the steps on how to get up a power window manually Step 1: Take Out the Door Panel
0 Comments
Leave a Reply. |